Thanks, looking good.

I am planning to put the covers altogether with the Pioneer speakers, so I guess they will fit fine with the 4 screws.

Edit: I have also downloaded the 3D file of a ring adapter, it's going to be printed out by a local company. Thanks for sharing it.

No. Most of the work has been done by my mechanic, I was just there helping out to loosen some bolts. It's really an easy work. Only thing to note is removing the headlight in order to easily access the three strut bolts on top.

Have replaced the bearing (it was a 20 minutes job), but the sound is still present.

I think we will try replacing the other side as well.

Have you tried putting the Pioneer cover?
Will it fit?

I see. Windows are closing all the way down?

Ok. I just spoke with the store and they said they have a strut bearing for a Peugeot 106, however since it has been only produced until 2005 - it's the newest they can get.

I guess I should take the car to the mechanic and take the bearing (if there is one actually) to the store and compare it. Same with the tie rod.

My mechanic's conclusion is also a wared-out bearing.

There is no information about it in the manual and I also cannot find the replacement part anywhere online. Since there are a lot of Ford parts on the car, could it be actually a Ford part that I can get?

Perhaps I could also search for a tie rod and replace it, while I'm there.

I will take this into consideration. However, I've had some old cars which had problems with CV joints and this one has no symptoms as such. The joints look good, no grease coming out of them, no rattle noises when turning and no vibrations while driving. It only pops once when I turn the steering wheel all to the left and all to the right. Also when I go in reverse and then forward.

The popping sound is more like if, all of a sudden, something gets out of tension.
So, my guess would be that it has something to do with the suspension spring or somewhere around.

Sitat fra: BauDemo på lørdag 17. april 2021, klokken 13:54
There is a need for 6mm adapter ring so the new speaker sticks out compared to the original one, but the speaker cover remains the same.

Looking good!

Why did you need to use the 6mm adapter ring?

Also, will the grill that comes with a speaker fit? My original is broken.

I have a popping sound when I turn the steering all the way left and all the way right, also when changing direction: when starting to move backwards and then forward. It only pops once.

The "pop" sound is to be heard somewhere around the left suspension. The sound is similar like hitting a suspension spring with a hammer, if that makes sense. Nothing else can be felt while driving.

The car was stationery for quite some time, around 1 year or so, before it got repaired.

Is there a shock absorber bearing in these cars? Could this be causing a problem?

Hi,

I am looking to rent out a PCAN-USB adapter IPEH-002021 or IPEH-002022.
Does anyone have one?

***************************

Jeg ønsker å leie ut en PCAN-USB-adapter IPEH-002021 eller IPEH-002022.
Er det noen som har en?


Damir

Seems like mine is GEN1 - VIN is U005019

Can you tell if this is a GEN2 version?
Would it be easy to swap it to Li-Ion battery?

Here is the diagnostic result:



Also, it is attached to this post.


So, what would be the best possible solution to go with next?

Sitat fra: VWspirit på søndag 07. februar 2021, klokken 20:54
Bud over 15t

?