Bli medlem i Norsk elbilforening og støtt driften av Elbilforum. Som medlem får du i tillegg startpakke, medlemsfordeler og gode tips om elbil og lading. Du blir med i et fellesskap som jobber for mindre utslipp fra veitrafikken. Medlemskap koster 565 kroner per år. elbil.no/medlemskap
Hovedmeny
meny

Vis innlegg

Denne delen lar deg se alle innlegg laget av dette medlemmet. Merk at du bare kan se innlegg gjort i områder du har tilgang til.

Vis innleggmeny

Meldinger - pexic

#1
Hi, you can use Aluminium "Z type" profile :
https://i.ebayimg.com/images/g/vdUAAOSw1nRbETfa/s-l1600.jpg

I think 3mm thickness will do the job.
#2
" But this also means that balancing does not happen when car is idle"  yes, it does. (top)ballancing works without 12v power on RLEC modules.

100mA is enough for enerdel cells but how long we will find these cells on the "market" ?
I think a more versatile approach is the way to go, especially for bussines.
good luck.
#3
Hi
my advice : keep it simple , replace Mlec and all Rlec modules with
1- stand alone BMS (ballance current >1A)
This allow almost any type of BMS+cells to be used.
2- one new "Mlec" module who will communicate with PCU and and also measure : current ? module (12s) voltage / module temp. (you can divide by 12 and send "semi-fake" cell voltage to PCU since the BMS will owrk to keep all cells at the same level.)
This is a little harder but is doable, not so much communication are between Mlec and PCU.

good luck!
#4
print screen from commtool please :) thanks.
#5
  [ You are not allowed to view this attachment ]  

put these inside the box !!
#7
no idea the exact vaue but my uess is that 47...68nf will work.


ps; sorry my keyboard is broken
#8
  [ You are not allowed to view this attachment ]  
#9
Hi  I have 30ah lto battery in my think ( >3 years) - no problem so far
made from 6 cells in series : https://shop.gwl.eu/LTO-technology/Cylindrical-Lithium-Titanate-Oxid-Battery-Cell-LTO-2-3V-30AH.html
#10
attached
#11
aps1_3_dis_fault   fault_status[0]^7   s      APS disagreement > 25% between signals - likely faulty sensor or harness
aps2_3_dis_fault   fault_status[0]^8   s      APS disagreement > 25% between signals - likely faulty sensor or harness
aps_conflict_dtc_fault   fault_status[3]^10   M      APS 1 2 or 3 disagreement

:+1:
#12
good luck and keep us posted, IMO 95% it is not the battery fault ;)
#13
Hi

You have to take the laptop with you and drive untill the error reppears, at that moment use CHaS and print-screen the error report.
#14
"Nye" TH!NK City produsert fra 2008 - 2012 / Sv: think 2009
lørdag 02. oktober 2021, klokken 18:07
Dismount and clean the electric multi-contactor connected to the gear selector.
#15
Hi Svilen.
I can send you the zebra software -please send me a private message with your email.
Regarding PEAK adapter you have two choices:

1- buy one (new is about 200 eur as far I remenber, from Germany) - https://www.peak-system.com/PCAN-USB.199.0.html?&L=1&gclid=CjwKCAjw95yJBhAgEiwAmRrutHcgqmf9T5ZkfG3Ef955GHJghFZuPa92hID7kXOD6IYxFil5JgEEXxoC9rUQAvD_BwE

2-two trips to Bucharest and I can borrow you the adapter.

good luck !
© 2024, Norsk elbilforening   |   Personvern, vilkår og informasjonskapsler (cookies)   |   Organisasjonsnummer: 982 352 428 MVA